Regarding LED

We basically measure their efficiency using a function of 2 indicators, which are lumens and watts. Specifically we measure the light emission of the lighting fixture in relation to its electrical power and therefore its power consumption.

The meaning of color in LED products is the temperature of light. Specifically it defines how cold or warm is the light emission. This temperature is measured in Kelvin degrees and essentially measures the hue of light. The usual color temperatures range from 2700 K (Kelvin) to 6500 K. The lowest color temperature emits what

The color produced by the LED chip of each fixture, even if it has the exact same characteristics (3.00k or 4.00k), is likely to differ from product to product.

DALI Lighting Fixture To dim a DALI lighting fixture, your installation must include a two-wire line from the signal source (e.g., a KNX smart home system) to the lighting fixtures. This allows the fixtures to be controlled via the KNX system, enabling you to create groups, scenarios, and other configurations. Push-Dim Lighting Fixture To dim

Dimmable phase-cut drivers may produce a slight humming noise, especially when adjusted to output levels lower than their maximum. The intensity of this hum depends on the load they are powering and the type of dimmer used. In any case, it is a low-level hum, though it may be noticeable to some individuals. For this